Spa Pool Maintenance
FIX A LEAK For Swimming Pools, Spas, & Hot Tubs
Spas & Hot Tubs
This patented product formulation is a concentrated, blended material that seals leaks in virtually any material: walls, floor, shell, suction lines and plumbing lines. Can help to make a long-lasting seal, in holes up to 1/8" in diameter.
Swimming Pools
Pools use 1-quart (954 ml.) for up to 22,000 gallons or 83,600 liters. Spas use 4 ounces per 250 gallons or 950 liters.
Spa & Hot Tub Leaks
Shake well before using!
1. Bypass Filter or remove filter cartridge, before adding FIX-A-LEAK to water.
2.With pump running, add FIX-A-LEAK slowly through skimmer or in front of any other suction intake
3. FIX-A-LEAK is very heavy and will sink to the lowest point rather quickly. It must be stirred back into suspension every 4-6 hours, while maintaining the circulation.
4.Continue to recirculate water, until the leak has stopped.
5. After the leak has stopped, give it the proper time to cure (24-48 hours). Then, you may return to normal filtration.
6. Treatment can be repeated, if necessary.
7. Never allow cartridges or DE elements to dry before they are cleaned. Rinse clean with water.
8. If your spa is a foam insulated type and has been leaking for a long period of time, it is advisable to drain your tub, after determining that the leak has stopped. Thoroughly, wipe down the spa with a soft, non-abrasive wet cloth. Allow to dry for 4-5 days to all FIX A LEAK to properly cure. | 
